• 1
  • 2
  • 3
    주소 :심천시 보안구 사정 거리 홍전로 홍전 김원공업지구 A 13
    전화 : +86-755-2977 6513
    팩스:  +86-755-2977 6513
    공식 웹 사이트 : www.100yrs.cn
제품 세부 정보
  제품 세부 사항 << :현재 위치
 후지 마운터 >> Fuji NXT M3III
 
Fuji NXT M3III
제품 ID:
81021153916
제품 이름:
Fuji NXT M3III
명세서:
비고 정보:
범주:
후지 마운터
 
   제품 설명

经过近在半年的发展,通过不断的创新、实践和努力,从刚开始的10台机起步,到如今公司已具备一定规模,有松下、富士、雅马哈三个品牌,在行业中拥有一定的影响力和知名度。三个品牌共拥有贴片机100多台,能为全国各大中小型企业提供优质、高效的贴片机整线租赁服务。

M3 III M6 III
Applicable PCB size
(L x W)
48 x 48 mm to 250 x 510 mm (double conveyor)*
48 x 48 mm to 250 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
48 x 48 mm to 534 x 510 mm (double conveyor)*
48 x 48 mm to 534 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
Part types Up to 20 types of parts (calculated using 8 mm tape) Up to 45 types of parts (calculated using 8 mm tape)
PCB loading time For double conveyor: 0 sec (continuous operation)
For single conveyor: 2.5 sec (transport between M3 III modules),
3.4 sec (transport between M6 III modules)
Placement accuracy
(Fiducial mark standard)
* The placing accuracy is obtained from tests conducted by Fuji.
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04 : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H08M/H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04/OF : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
Productivity
* The throughput above is based on tests conducted at Fuji.
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
GL : 16,363 dph (0.22 sec/dot)
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08M : 13,000 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
0F : 3,000 cph
GL : 16,363 dph (0.22 sec/dot)
Supported parts
H24G : 0201 to 5 x 5 mm
V12/H12HS : 0402 to 7.5 x 7.5 mm
H08M : 0603 to 45 x 45 mm
H08 : 0402 to 12 x 12 mm
H04 : 1608 to 38 x 38 mm
H04S/H04SF : 1608 to 38 x 38 mm
H02/H02F/H01/0F : 1608 to 74 x 74 mm (32 x 180 mm)
G04/G04F :0402 to 15 x 15 mm
Height : up to 2.0 mm
Height : up to 3.0 mm
Height : up to 13.0 mm
Height : up to 6.5 mm
Height : up to 9.5 mm
Height : up to 6.5 mm
Height : up to 25.4 mm
Height : up to 6.5 mm
Module width 320 mm 645 mm
Machine dimensions L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III)
W: 1900.2 mm, H: 1476 mm

DynaHead(DX)
Nozzle quantity 12 4 1
Throughput(cph) 25,000
Parts presence function ON: 24,000
11,000 4,700
Part size
(mm)
0402 (01005") to 7.5 x 7.5
Height:
Up to 3.0 mm
1608 (0603")
to 15 x 15
Height:
Up to 6.5 mm
1608 (0603")
to 74 x 74 (32 x 100)
Height:
Up to 25.4 mm
Placing accuracy
(Fiducial mark based referencing)
+/-0.038 (+/-0.050) mm (3σ) cpk≥1.00*
*+/-0.038 mm obtained with rectangular chip placement (high accuracy tuning) under optimal conditions at Fuji.
+/-0.040 mm (3σ) cpk≥1.00 +/-0.030 mm (3σ) cpk≥1.00
Part presence
check
o x o
Parts
supply
Tape o o o
Stick x o o
Tray x o o


Parts supply system
lntelligent feeders Support for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide tape
Stick feeders 4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤ 32 mm (18 ≤ Stick width ≤ 36 mm)
Trays Applicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray Unit-M),276 x 330 mm (Tray Unit- LT), 143 x 330 mm (Tray Unit-LTC)
Options
Tray feeders, PCU II (Pallet Change Unit), MCU (Module change unit), Engineering panel stand, FUJI CAMX Adapter, Fujitrax
조회수 :4337  시간 추가 :2016-8-10 【Print
 
Copyright © 100yrs.cn  Shenzhen United Leasing Co., Ltd. All Right Reserved