• 1
  • 2
  • 3
    深圳市合众租赁有限公司

    地址:深圳市宝安区沙井街道洪田路洪田金源工业区A13
    联系人:覃昌方 13802394231(微信)
    电话:0755-23283103
    传真:0755-2977 6513
    官网:www.100yrs.cn
产品展示
  产品中心 << 久久棋牌游戏中心:您的位置
 富士贴片机租赁 >> 富士NXT M3III
 
富士NXT M3III
产品编号:
81021153916
产品名称:
富士NXT M3III
规  格:
产品备注:
产品类别:
富士贴片机租赁
 
   产 品 说 明



经过近在半年的发展,通过不断的创新、实践和努力,从刚开始的10台机起步,到如今公司已具备一定规模,有松下、富士、雅马哈三个品牌,在行业中拥有一定的影响力和知名度。三个品牌共拥有贴片机100多台,能为全国各大中小型企业提供优质、高效的贴片机整线租赁服务。

M3 III M6 III
Applicable PCB size
(L x W)
48 x 48 mm to 250 x 510 mm (double conveyor)*
48 x 48 mm to 250 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
48 x 48 mm to 534 x 510 mm (double conveyor)*
48 x 48 mm to 534 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
Part types Up to 20 types of parts (calculated using 8 mm tape) Up to 45 types of parts (calculated using 8 mm tape)
PCB loading time For double conveyor: 0 sec (continuous operation)
For single conveyor: 2.5 sec (transport between M3 III modules),
3.4 sec (transport between M6 III modules)
Placement accuracy
(Fiducial mark standard)
* The placing accuracy is obtained from tests conducted by Fuji.
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04 : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H08M/H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04/OF : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
Productivity
* The throughput above is based on tests conducted at Fuji.
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
GL : 16,363 dph (0.22 sec/dot)
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08M : 13,000 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
0F : 3,000 cph
GL : 16,363 dph (0.22 sec/dot)
Supported parts
H24G : 0201 to 5 x 5 mm
V12/H12HS : 0402 to 7.5 x 7.5 mm
H08M : 0603 to 45 x 45 mm
H08 : 0402 to 12 x 12 mm
H04 : 1608 to 38 x 38 mm
H04S/H04SF : 1608 to 38 x 38 mm
H02/H02F/H01/0F : 1608 to 74 x 74 mm (32 x 180 mm)
G04/G04F :0402 to 15 x 15 mm
Height : up to 2.0 mm
Height : up to 3.0 mm
Height : up to 13.0 mm
Height : up to 6.5 mm
Height : up to 9.5 mm
Height : up to 6.5 mm
Height : up to 25.4 mm
Height : up to 6.5 mm
Module width 320 mm 645 mm
Machine dimensions L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III)
W: 1900.2 mm, H: 1476 mm

DynaHead(DX)
Nozzle quantity 12 4 1
Throughput(cph) 25,000
Parts presence function ON: 24,000
11,000 4,700
Part size
(mm)
0402 (01005") to 7.5 x 7.5
Height:
Up to 3.0 mm
1608 (0603")
to 15 x 15
Height:
Up to 6.5 mm
1608 (0603")
to 74 x 74 (32 x 100)
Height:
Up to 25.4 mm
Placing accuracy
(Fiducial mark based referencing)
+/-0.038 (+/-0.050) mm (3σ) cpk≥1.00*
*+/-0.038 mm obtained with rectangular chip placement (high accuracy tuning) under optimal conditions at Fuji.
+/-0.040 mm (3σ) cpk≥1.00 +/-0.030 mm (3σ) cpk≥1.00
Part presence
check
o x o
Parts
supply
Tape o o o
Stick x o o
Tray x o o


Parts supply system
lntelligent feeders Support for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide tape
Stick feeders 4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤ 32 mm (18 ≤ Stick width ≤ 36 mm)
Trays Applicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray Unit-M),276 x 330 mm (Tray Unit- LT), 143 x 330 mm (Tray Unit-LTC)
Options
Tray feeders, PCU II (Pallet Change Unit), MCU (Module change unit), Engineering panel stand, FUJI CAMX Adapter, Fujitrax
点击数:3323  录入时间:2016-8-10 【打印此页
 
网站久久棋牌游戏中心  |  关于我们  |  产品展示  |  在线留言  |  联系我们  |  产品目录
深圳市合众租赁有限公司 版权所有 Copyright © 100yrs.cn    技术支持:
友情连接:   |    |    |